Removal And Installation: Removal
WARNING: This page is about a different variant/trim than selected.
NOTE:
Removal steps in this procedure may contain installation details.
- Refer to: ENGINE COVER - V6 S/C 3.0L PETROL / V8 N/A 5.0L PETROL / V8 S/C 5.0L PETROL .
Torque Specification: 7 Nm
-
NOTE: LH illustration shown, RH is similar.
Torque Specification: 7 Nm
NOTE:
The step must be carried out on both sides.
Torque Specification: 20 Nm