General Procedures: Draining
WARNING: This page is about a different variant/trim than selected.
WARNING:
Since injury such as scalding could be caused by escaping steam or coolant, make sure the vehicle cooling system is cool prior to carrying out this procedure.
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: AIR CLEANER OUTLET PIPE T-CONNECTOR .
- Refer to: ENGINE UNDERSHIELD .
-
WARNING: When releasing the cooling system pressure, cover the coolant expansion tank cap with a thick cloth.
-
CAUTION: Be prepared to collect escaping coolant.
-
CAUTION: Be prepared to collect escaping coolant.
Torque Specification: 5 Nm