LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2015 >> Range Rover Autobiography >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Cooling - V6 S/C 3.0L Petrol -- Range Rover/L405) >> Engine Cooling - V6 S/C 3.0L Petrol >> Coolant Expansion Tank >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different variant/trim than selected.
WARNING: Since injury such as scalding could be caused by escaping steam or coolant, make sure the vehicle cooling system is cool prior to carrying out this procedure.
  1. G11693941
  2. WARNING: When releasing the cooling system pressure, cover the coolant expansion tank cap with a thick cloth.
    G11715289
  3. Using a syringe, remove the cooling fluid from the expansion tank.
  4. CAUTION: Clamp the hoses to minimize coolant loss.
    G11715369
  5. CAUTION: Be prepared to collect escaping coolant.
    G11715370
  6. G11715371
  7. CAUTION: Be prepared to collect escaping coolant.
    G11715372
scientia non olet · About LEMON Manuals