LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2015 >> Range Rover Autobiography >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine - V6 S/C 3.0L Petrol -- Range Rover/L405) >> Engine - V6 S/C 3.0L Petrol >> Valve Clearance Adjustment >> General Procedures >> Adjustment

General Procedures: Adjustment

WARNING: This page is about a different variant/trim than selected.
  1. Remove the camshafts.

    Refer to: CAMSHAFT LH 

    Refer to: CAMSHAFT RH 

  2. CAUTION: Do not use a magnet to remove the tappet.
    G11606645

    Remove the tappet and measure the thickness.

  3. NOTE: Use the following formula to calculate the required tappet thickness

    Original tappet thickness + measured valve clearance - desired valve clearance = required tappet thickness.

scientia non olet · About LEMON Manuals