Removal And Installation: Removal
WARNING: This page is about a different variant/trim than selected.
NOTE:
Removal steps in this procedure may contain installation details.
- Disconnect the battery ground cable.
Refer to: SPECIFICATIONS
-
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
- Refer to: EXHAUST SYSTEM
- Refer to: ACCESSORY DRIVE BELT
-
NOTE: Loosen the bolts, but do not fully remove.
-
CAUTION: Discard the bolts.NOTE: Discard the gasket.
-
NOTE: Do not disassemble further if the component is removed for access only.