Cylinder Head Components: Notes
WARNING: This page is about a different variant/trim than selected.
NOTE:
Bank 2 cylinder head is shown, Bank 1 cylinder head is similar.
| ITEM | DESCRIPTION |
|---|---|
| 1 | Oil filler cap assembly |
| 2 | Stud, nut, grommet and sleeve - 1 of bank 2, 2 of bank 1 |
| 3 | Bolt, grommet and sleeve - 15 of |
| 4 | Camshaft cover |
| 5 | Exhaust camshaft caps - 4 of |
| 6 | Inlet camshaft caps - 4 of |
| 7 | Camshaft cap bolts - 16 of |
| 8 | Inlet camshaft |
| 9 | Exhaust camshaft |
| 10 | Cylinder head bolts - 13 of |
| 11 | Cylinder head |
| 12 | Cylinder head gasket |
| 13 | Variable Camshaft Timing (VCT) actuator assembly - exhaust |
| 14 | Variable Camshaft Timing (VCT) actuator assembly - inlet |
| 15 | Valve - 12 of (6 inlet, 6 outlet) |
| 16 | Valve spring seat and stem seal - 12 of |
| 17 | Valve spring - 12 of |
| 18 | Valve spring retainer - 12 of |
| 19 | Valve spring collet - 24 of |
| 20 | Valve tappet - 12 of |
| 21 | Camshaft cover gasket |
| 22 | Camshaft cover spark plug/injector gasket - 3 of |