LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2015 >> Range Rover Autobiography >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Electronic Engine Controls - V6 S/C 3.0L Petrol -- Range Rover/L405) >> Electronic Engine Controls - V6 S/C 3.0L Petrol >> Electronic Engine Controls (Description And Operation) >> Description And Operation >> Description >> Manifold Absolute Pressure Sensor

Manifold Absolute Pressure Sensor

WARNING: This page is about a different variant/trim than selected.
G11608565

The Manifold Absolute Pressure (MAP) sensor allows the Powertrain Control Module (PCM) to calculate the load on the engine, which is used in the calculation of fuel injection time.

The MAP sensor is installed in the air inlet of the supercharger. The sensor is secured with a single screw and sealed with an O-ring. A three pin electrical connector provides the interface with the engine harness.

If the MAP sensor fails, the PCM adopts a default value of 1 bar (14.5 lbf/in.2).

With a failed MAP sensor, the engine will suffer from poor starting, rough running and poor drive ability.

scientia non olet · About LEMON Manuals