LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2015 >> Range Rover Autobiography >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Engine - TDV6 3.0L Diesel - Gen 2/TDV6 3.0L Diesel -- Range Rover/L405) >> Engine - TDV6 3.0L Diesel - Gen 2/TDV6 3.0L Diesel >> Crankshaft Pulley - TDV6 3.0L Diesel - Gen 2 >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Make sure that the pulley washer is correctly seated before installing the pulley.
    G11601920
  2. CAUTION: Do not lubricate the components.
    NOTE: Do not tighten at this stage.
    G11601921

    Install crankshaft pulley.

    Renew Part: Crankshaft pulley bolt Quantity: 1  .

    CAUTION: Make sure the alignment marks are aligned.
  3. G11601922
  4. CAUTION: Do not lubricate the components.
    G11601921

    Torque Specifications: 

    Stage 1: 150 Nm 

    Stage 2: 300 Nm 

    Stage 3: 90° 

  5. G11601916
    • Remove the special tool.
    • Special Tool(s): 303-1123 
  6. G11601805
    • Remove the special tool.
    • Special Tool(s): 303-1117 
  7. Refer to: TIMING BELT 
scientia non olet · About LEMON Manuals