DTC P06FB-96: Glow Plug Control Module 2 Memory Checksum Error - Component internal failure: Action
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the appropriate system wiring diagram and check the LIN_B circuit or glow plug control module circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Inspect connectors for signs of water ingress, and pins for damage and/or corrosion
- Check and install a new glow plug control module as required
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest