Possible Causes
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2014 Land Rover Range Rover, and 2013 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The final drive ratio is output as part of the car configuration file. If the value received by the powertrain control module does not match the internally used value, this DTC will be set.
- Car configuration file mismatch with vehicle specification
- FlexRay bus circuit short circuit to ground, short circuit to power, open circuit, high resistance
- Body control module fault