DTC P2299-24: Brake Pedal Position/Accelerator Pedal Position Incompatible - Signal stuck high: Action
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2014 Land Rover Range Rover, and 2013 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Check powertrain control module for related DTCs and refer to relevant DTC index
- Check that the brake pedal switch is mounted and correctly positioned on the mounting bracket/pedal box
- Check for smooth operation of the brake pedal switch plunger
- Refer to the appropriate system wiring diagram and check brake pedal switch 1 circuit for open circuit, short circuit to power, short circuit to ground
- Refer to the appropriate system wiring diagram and check brake pedal switch 2 circuit for open circuit, short circuit to power, short circuit to ground