DTC P064A-42: Fuel Pump Control Module A - General memory failure: Action
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2014 Land Rover Range Rover, and 2013 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect connectors for signs of water ingress, and pins for damage and/or corrosion
- Refer to the appropriate system wiring diagram and check fuel pump driver module diagnostic circuit for open circuit, short circuit to power, short circuit to ground
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest
- Using the Jaguar Land Rover approved diagnostic equipment, perform routine - Inline diagnostic unit 2 non-intrusive test - Low pressure fuel pump
- Check and install a new fuel pump driver module as required