DTC P0606-94: Control Module Processor - Unexpected operation: Action
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2014 Land Rover Range Rover, and 2013 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Check battery is in fully charged and in a serviceable condition using a battery tester and battery care manual
- Refer to the appropriate system wiring diagram and check the power and ground connections to the module
- Clear the DTC and test drive the vehicle including at least five ignition cycles. Check for DTCs. If DTC is not present return to customer. If DTC repeatedly returns, check and install a new powertrain control module as required. Using the Jaguar Land Rover approved diagnostic equipment, configure the powertrain control module as a new module