Possible Causes
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2014 Land Rover Range Rover, and 2013 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Monitor description. The powertrain control module checks that the hard wired crank request from the body control module matches the network powermode signal.
- This DTC is set when the powertrain control module has detected a power measurement for a period longer than expected or has detected a power measurement when another value was expected.
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Starter request circuit short circuit to power