Possible Causes
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2014 Land Rover Range Rover, and 2013 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Monitor description. Circuit check
- This DTC is set when the powertrain control module has determined an open circuit via lack of bias voltage, low current flow, no change in the state of an input in response to an output.
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Engine cooling fan circuit open circuit, high resistance
- Engine cooling fan failure