DTC P0350-04: Ignition Coil Primary/Secondary Circuit/Open - System internal failures: Action
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2014 Land Rover Range Rover, and 2013 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Vehicle Conditions to enable DTC Logging strategy
- Ignition on
- Prioritized Checks to Perform
- Check powertrain control module for additional DTCs and refer to relevant DTC index. Rectify these first
- Refer to the appropriate system wiring diagram and check the power and ground connections to the module
- Check and install a new powertrain control module as required. Using the Jaguar Land Rover approved diagnostic equipment, configure the powertrain control module as a new module
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest