Possible Causes
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2014 Land Rover Range Rover, and 2013 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Monitor description. To diagnose a failure on the signal line to the fuel pump driver module
- This DTC is set when the powertrain control module has detected a power measurement for a period longer than expected or has detected a power measurement when another value was expected.
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Fuel pump driver module circuit, short circuit to power