DTC P0223-85: Throttle/Pedal Position Sensor/Switch B Circuit High - Signal above allowable range: Action
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2014 Land Rover Range Rover, and 2013 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Vehicle Conditions to enable DTC Logging Strategy
- Ignition On, Engine greater than 1200 RPM for 5 seconds
- Inspect connectors for signs of water ingress, and pins for damage and/or corrosion
- Refer to the appropriate system wiring diagram and check the electric throttle circuit for
- Short circuit to ground
- Short circuit to power
- Open circuit
- High resistance
- Using the manufacturer approved diagnostic system clear all stored DTCs using the 'Diagnosis Menu' tab and retest