Possible Causes
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2014 Land Rover Range Rover, and 2013 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Monitor description. The powertrain control module monitors the input frequency signal from the sensor and sets the DTC if there is electrical failure.
- This DTC is set when the powertrain control module has determined failures where some circuit quantity, reported via serial data, is above a specified range.
- Mass air flow sensor connector is not correctly latched
- Power feed to mass air flow sensor, open circuit
- Mass air flow sensor circuit, short circuit to power
- Mass air flow sensor failure