Possible Causes
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2014 Land Rover Range Rover, and 2013 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This DTC is set when the powertrain control module has measured a signal voltage above a specified range but not necessarily a short circuit to power, gain too high.
- Manifold absolute pressure and temperature sensor circuit, short circuit to ground, short circuit to power, open circuit, high resistance
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Manifold absolute pressure and temperature sensor failure