Possible Causes
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Purpose of the DTC
- Cylinder injector circuit low, signal stuck low
- Electrical Cause
- Yes
- Mechanical Cause
- Yes
- Control module cavity
- Circuit reference O_P_PVL22
- Circuit reference O_P_PVH22
- Monitor Description
- Signal value below threshold
- Prioritised List of Possible Causes
- The powertrain control module measures a signal that remains low when transitions are expected
- Driver output voltage of fuel injector below threshold
- Fuel injector circuit short circuit to ground, high resistance
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Fuel injector failure