Possible Causes
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Purpose of the DTC
- Monitoring injector for short circuit high side switch to low side
- Electrical Cause
- Yes
- Mechanical Cause?
- Yes
- Control module cavity
- Circuit reference O_P_PVL12
- Circuit reference O_P_PVH12
- Monitor Description
- Driver output voltage of injector below threshold
- Prioritised List of Possible Causes
- The powertrain control module has detected a ground measurement for a period longer than expected or has detected a ground measurement when another value was expected
- Driver output voltage of fuel injector below threshold
- Fuel injector circuit short circuit to ground, high resistance
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Fuel injector failure