Possible Causes
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Purpose of the DTC
- To indicate a crash has been detected by the powertrain control module
- Electrical Cause
- Yes
- Mechanical Cause
- No
- Control Module Cavity
- Circuit reference - I_F_INS -
- Monitor Description
- Crash signal received via the vehicle network or the hardwired crash signal circuit to the powertrain control module
- Prioritised List of Possible Causes
- Crash signal circuit short circuit to ground, short circuit to power, open circuit, high resistance
- Supplementary restraint system fault
- High speed CAN bus (chassis) circuit short circuit to ground, short circuit to power, open circuit, high resistance
- FlexRay bus circuit short circuit to ground, short circuit to power, open circuit, high resistance
- Restraints control module power or ground circuit open circuit, high resistance