Fuel Tank And Lines - TDV6 3.0L Diesel: Specifications
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
CAPACITIES
| LITERS | |
|---|---|
| Fuel tank capacity | 90 (usable) |
GENERAL SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Fuel system | Mechanical - recirculating |
| Fuel tank | Multi layer plastic |
| High pressure fuel pump | Located at rear of engine between the cylinder heads, belt driven from the camshafts |
| Low pressure fuel pump | Dual stage electric - submersible - located in fuel tank |
| Fuel cooler | Located on the left front suspension top mount assembly |
| Fuel filter | Remotely located on the left front suspension top mount assembly - fitted with a renewable element |
| Fuel tank sender units | Two - active and passive - passive sender unit is attached to the removable retaining bracket and the active sender unit is attached to the fuel pump swirl pot |
| High pressure fuel pump maximum operating pressure | 1650 bar - 23931.2 lbf/in2 |
| Low pressure fuel pump operating pressure | 0.5 bar - 7.25 lbf/in2 |
TORQUE SPECIFICATIONS
| DESCRIPTION | NM | LB-FT | LB-IN |
|---|---|---|---|
| Fuel cooler retaining bolts | 9 | - | 80 |
| Fuel tank internal bracket retaining bolt | 7 | - | 62 |
| Fuel tank filler pipe retaining nuts | 9 | - | 80 |
| Fuel tank filler pipe hose clamp | 3.5 | - | 31 |
| Fuel tank shield retaining bolts | 45 | 33 | - |
| Fuel tank shield to fuel tank bolt | 10 | 7 | - |