LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2015 >> Range Rover Autobiography >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Fuel Tank & Lines - TDV6 3.0L Diesel -- Range Rover/L405) >> Fuel Tank And Lines - TDV6 3.0L Diesel >> Fuel Tank And Lines (Diagnosis And Testing) >> Diagnosis And Testing >> Mis-Fueling Issues - Adding Diesel Exhaust Fluid (Def) To The Diesel Fuel Tank >> Mis-Fueling Procedure 1

Mis-Fueling Procedure 1

WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
SYMPTOM POSSIBLE CAUSES ACTION
Mis-fueling issue. The diesel fuel tank has been filled with diesel exhaust fluid The vehicle has been incorrectly fueled and the ignition switch has NOT  been switched to ON 
  1. Referring to the relevant section in the service information, drain the fuel tank
  2. Remove the primary fuel pump/sender module and in-tank transfer pipe. Invert the pump/sender module to drain excess fuel
  3. Remove all traces of residual fuel within the fuel tank using clean absorbent cloth/paper
  4. Flush the pump/sender module and in tank transfer pipe with clean diesel
  5. Reassemble the pump/sender module and in tank transfer pipe to the fuel tank and install to the vehicle
  6. Fully fill the fuel tank with clean diesel
  7. Road test the vehicle for at least 10 miles/16Km
  8. Return the vehicle to the customer
scientia non olet · About LEMON Manuals