Possible Causes
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Purpose of the DTC
- The oil level sensor is not capable to send a recognizable signal to the powertrain control module
- Electrical Cause
- Yes
- Mechanical Cause
- Yes
- Control Module Cavity
- Circuit reference I_T_OCS
- Circuit reference G_G_OCS
- Monitor Description
- The signal sent by the oil level sensor doesn't match the pattern
- Oil level and temperature sensor circuit short circuit to ground, short circuit to power, open circuit, high resistance
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Oil level and temperature sensor failure