LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2015 >> Range Rover Autobiography >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Cooling - TDV6 3.0L Diesel - Gen 2/TDV6 3.0L Diesel -- Range Rover/L405) >> Engine Cooling - TDV6 3.0L Diesel - Gen 2/TDV6 3.0L Diesel >> Radiator >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: AIR CONDITIONING SYSTEM RECOVERY, EVACUATION AND CHARGING
  2. Refer to: COOLING FAN 
  3. G11715408
  4. CAUTION: Make sure that all openings are sealed.
    G11715409

    Renew Part: Air conditioning pipes to condenser O-ring seals Quantity: 1  .

    Torque Specification:  8 Nm

  5. G11715410
  6. CAUTION: Remove and discard the O-ring seals.
    G11715411

    Renew Part: Air conditioning pipes to condenser O-ring seals Quantity: 1  .

    Torque Specification:  8 Nm

  7. G11715412
  8. G11715413

    Torque Specification:  15 Nm

  9. NOTE: If equipped.
    G11715414

    Torque Specification:  7 Nm

  10. G11715415
  11. CAUTION: Always protect the cooling pack elements to prevent accidental damage.
    G11715416
  12. CAUTION: Always protect the cooling pack elements to prevent accidental damage.
    G11715417
  13. G11715418
  14. G11715419

  15. Torque Specification:  4.5 Nm

    G11715420
  16. G11715421
scientia non olet · About LEMON Manuals