LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2015 >> Range Rover Autobiography >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Emission Control - TDV6 3.0L Diesel - Gen 2/TDV6 3.0L Diesel -- Range Rover/L405) >> Engine Emission Control - TDV6 3.0L Diesel - Gen 2 / TDV6 3.0L Diesel >> Right Exhaust Gas RECIRCULATION Valve >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: SPECIFICATIONS .
  2. Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING .
  3. Refer to: SECONDARY BULKHEAD CENTRE PANEL - TDV6 3.0L DIESEL .
  4. Refer to: RIGHT EXHAUST GAS RECIRCULATION VALVE OUTLET TUBE .
  5. G11698411
  6. G11698412
  7. G11698413

    Torque Specification:  8 Nm

  8. NOTE: If equipped.
    G11607496

    Torque Specification:  10 Nm

  9. NOTE: If equipped.
    G11698415

    Torque Specification:  10 Nm

  10. G11698416

    Torque Specification:  10 Nm

  11. G11698417
  12. NOTE: Install a new gasket.
    G11698418

    Torque Specification:  10 Nm