LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2015 >> Range Rover Autobiography >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Emission Control - TDV6 3.0L Diesel - Gen 2/TDV6 3.0L Diesel -- Range Rover/L405) >> Engine Emission Control - TDV6 3.0L Diesel - Gen 2 / TDV6 3.0L Diesel >> Right Exhaust Gas RECIRCULATION Valve Outlet Tube >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Only tighten the bolts finger-tight at this stage.
    NOTE: Install a new gasket.
    G11698430

    Renew Part: EGR pipe to exhaust manifold gasket  Quantity: 1  .

  2. CAUTION: Install a new clamp. Close the clamp to the first audible click by hand. Making sure that the clamp is in a central position to the joint, close to the second audible click using a suitable tool.
    G11771436

    Renew Part: Retaining clips  Quantity: 1  .

  3. G11608287

    Torque Specification: 5 Nm 

  4. G11608292

    Torque Specification: 10 Nm 

  5. G11602223
  6. Refer to: ENGINE COVER - TDV6 3.0L DIESEL .
scientia non olet · About LEMON Manuals