Electronic Engine Controls - TDV6 3.0L Diesel: Specifications
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| DESCRIPTION | NM | LB-FT | LB-IN |
|---|---|---|---|
| Camshaft position (CMP) sensor retaining bolt | 10 | 7 | - |
| Crankshaft position (CKP) sensor retaining bolt | 5 | - | 44 |
| Engine control module (ECM) retaining nuts | 7 | - | 62 |
| Engine oil pressure (EOP) sensor | 14 | 11 | - |
| Engine oil level sensor retaining bolts | 12 | 9 | - |
| Mass air flow (MAF) sensor | 2 | - | 18 |
| Manifold absolute pressure (MAP) sensor | 3 | - | 27 |
| Exhaust gas temperature sensor RH | 35 | 26 | - |
| Catalytic converter pre temperature sensor | 35 | 26 | - |
| Catalytic converter post temperature sensor | 35 | 26 | - |
| Diesel particulate filter (DPF) post exhaust gas temperature sensor | 35 | 26 | - |
| Heated oxygen sensor (HO2S) | 48 | 35 | - |