LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2015 >> Range Rover Autobiography >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Electronic Engine Controls - TDV6 3.0L Diesel -- Range Rover/L405) >> Electronic Engine Controls - TDV6 3.0L Diesel >> Electronic Engine Controls (Description And Operation) >> Description And Operation >> Description >> Water In Fuel Sensor

Water In Fuel Sensor

WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
G11699204

The Water In Fuel (WIF) sensor is located in the base of the fuel filter and is hardwired to the Powertrain Control Module (PCM). The sensor operates on the principle of differing resistance values to the transmission of current through water and fuel. When the volume of water in the fuel reaches 85 cm3 or more, the sensor value is sensed by the PCM. The PCM transmits a message on the High Speed (HS) Controller Area Network (CAN) powertrain systems bus to the Instrument Cluster (IC) which displays a message in the message center.

For additional information, refer to: FUEL TANK AND LINES

scientia non olet · About LEMON Manuals