LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2015 >> Range Rover Autobiography >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Electronic Engine Controls - TDV6 3.0L Diesel -- Range Rover/L405) >> Electronic Engine Controls - TDV6 3.0L Diesel >> Electronic Engine Controls (Description And Operation) >> Description And Operation >> Description >> Exhaust Gas RECIRCULATION Cooler Bypass Valve Solenoid

Exhaust Gas RECIRCULATION Cooler Bypass Valve Solenoid

WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
G11699197

The Exhaust Gas Recirculation (EGR) cooler bypass valve solenoid is located on a bracket at the rear of the engine, adjacent to the vacuum pump.

The EGR cooler bypass solenoid valve receives a 12 V supply from the Engine Junction Box (EJB). The Powertrain Control module (PCM) controls the operation of the solenoid valve by controlling the ground path for the solenoid. The controlled solenoid turns vacuum on or off to the actuator.

For additional information, refer to: ENGINE EMISSION CONTROL

scientia non olet · About LEMON Manuals