Fuel Charging And Controls - V8 S/C 5.0L Petrol: Specifications
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, 2016 Land Rover Range Rover, 2014 Land Rover Range Rover, and 2013 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Tighten the fuel rail high pressure fuel pump fuel line unions and fuel rail crossover pipe unions as it is instructed in service manual.
TORQUE SPECIFICATIONS
| DESCRIPTION | NM | LB-FT | LB-IN |
|---|---|---|---|
| Ignition coil-on-plugs retaining bolts | 8 | - | 71 |
| Fuel rail retaining bolt | Stage 1 - 20 Stage 2 - 30 | Stage 1 - 15 Stage 2 - 22 | - |
| Fuel rail crossover pipe unions | 21 | 15 | - |
| Fuel rail crossover pipe retaining bolts | 8 | - | 71 |
| Fuel rail pressure sensor | 33 | 24 | - |
| Fuel rail pressure and temperature sensor | 37 | 27 | - |
| Fuel rail high pressure fuel pump fuel line unions | 21 | 15 | - |
| Fuel rail high pressure fuel pump fuel line M8 bolt | 25 | 18 | - |
| Fuel rail high pressure fuel pump fuel line M6 bolt | 12 | 9 | - |
| Fuel rail high pressure fuel pump fuel line M5 nut | 6 | - | 53 |
| Fuel rail high pressure fuel pump fuel line shield M10 bolt | 29 | 21 | - |
| Fuel rail high pressure fuel pump fuel line shield M6 bolt | 12 | 9 | - |
| Fuel rail high pressure fuel pump torx bolts | 12 | 9 | - |
| Throttle body retaining bolts | 17 | 13 | - |
| Accessory drive belt idler pulley bracket bolts | 25 | 18 | - |
| Fuel pump driver module (FPDM) bracket to body bolt | 10 | 7 | - |
| FPDM to bracket bolts | 3 | - | 27 |