LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2015 >> Range Rover Autobiography >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - V8 S/C 5.0L Petrol -- Range Rover/L405 >> Engine Cooling - V8 N/A 5.0L Petrol/V8 S/C 5.0L Petrol >> Coolant Expansion Tank >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. G11715372
  2. G11715369
  3. NOTE: Keep the coolant expansion tank vertically.
    G11715303

    Raise the coolant expansion tank minimum 110mm from its original position.

  4. Fill the cooling system, keeping coolant to the upper level mark of the expansion tank, until a steady stream of coolant is seen returning to the tank.
  5. G11715376
  6. G11715370

    Torque Specification: 2.8 Nm 

  7. CAUTION: Make sure the coolant level remains above the "COLD FILL RANGE" lower level mark.

    Check and top up the cooling system as required.

  8. G11715311
scientia non olet · About LEMON Manuals