LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2015 >> Range Rover Autobiography >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - V8 S/C 5.0L Petrol -- Range Rover/L405 >> Engine Cooling - V8 N/A 5.0L Petrol/V8 S/C 5.0L Petrol >> Auxiliary Radiator >> Removal And Installation >> Removal

Removal And Installation: Removal

CAUTION: Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.
NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Refer to: FRONT BUMPER COVER .
  3. Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING .
  4. G11692897
  5. CAUTION: Be prepared to collect escaping coolant.
    NOTE: RH illustration shown, LH is similar.
    G11709085
  6. G11709167
  7. CAUTION: Make sure that new components are installed.
    G11709168
  8. G11709169

    Torque Specification: 9 Nm 

  9. G11709170

    Torque Specification: 5 Nm 

  10. CAUTION: Make sure that new components are installed.
    NOTE: Make sure that the locking tangs are installed correctly.
    G11709171
  11. NOTE: Do not disassemble further if the component is removed for access only.
    G11709172
  12. G11709173

    Torque Specification: 9 Nm 

  13. G11709174
  14. G11709175
scientia non olet · About LEMON Manuals