LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2015 >> Range Rover Autobiography >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Power Brake Actuation -- Range Rover/L405 >> Power Brake Actuation >> Brake Booster - RHD >> Removal And Installation >> Removal

Removal And Installation: Removal

NOTE:
  • Removal steps in this procedure may contain installation details.
  • Some variation in the illustrations may occur, but the essential information is always correct.
  1. Refer to: SECONDARY BULKHEAD RIGHT PANEL .
  2. Refer to: BRAKE MASTER CYLINDER - RHD .
  3. G11754496

    Release the instrument panel lower section.

  4. G11693909

    Remove the brake booster push rod clevis pin.

  5. G11693910
    • Release the retaining nut.
    • Torque Specification: 25 Nm 
  6. G11754499

    Release the brake booster vacuum hose.

  7. CAUTION: Care must be taken not to damage the component.
    G11754511

    Release the brake lines.

  8. G11754512

    Remove the brake booster.