LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2015 >> Range Rover Autobiography >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake Actuation -- Range Rover/L405 >> Hydraulic Brake Actuation >> Brake Master Cylinder - LHD >> Removal And Installation >> Removal

Removal And Installation: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: BRAKE FLUID RESERVOIR .
  2. CAUTION: Make sure that all openings are sealed. Use new blanking caps.
    G11693878

    Torque Specification: 16 Nm 

  3. CAUTION: Make sure that all openings are sealed. Use new blanking caps.
    NOTE:
    • Discard the retaining nuts.
    • Remove and discard the O-ring seal.
    • Take extra care not to damage the component.
    G11693879

    Renew Part: Brake master cylinder nuts Quantity: 1  .

    Renew Part: Brake master cylinder seal(s) Quantity: 1  .

    Torque Specification: 23 Nm 

scientia non olet · About LEMON Manuals