LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2015 >> LR4 Base, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake Actuation -- LR4/L319 >> Hydraulic Brake Actuation >> Brake Pedal >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. Remove the headlamp switch.

    For additional information, refer to: Headlamp Switch

  2. Remove the stoplamp switch.

    For additional information, refer to: Stoplamp Switch

  3. G11597308

    Remove the instrument panel access panel.

    • Release the 2 clips.
  4. G11597309

    Remove the brake pedal bracket.

    • Release the wiring harness clip.
    • Remove the 4 Torx bolts.
  5. G11597310

    Remove the brake pedal clevis pin.

    • Remove the clip.
  6. G11597311

    Remove the brake pedal.

    • Remove the nut and bolt.
  7. NOTE: Do not disassemble further if the component is removed for access only.
    G11597312

    Remove the brake pedal pad.

scientia non olet · About LEMON Manuals