Removal And Installation: Removal
CAUTION:
Brake fluid will damage paint finished surfaces. If spilled, immediately remove the fluid and clean the area with water.
All vehicles
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
Remove the cover.
- Position an absorbent cloth to collect fluid spillage.
- Disconnect the low brake fluid warning indicator switch electrical connector.
Vehicles with manual transmission
-
CAUTION: Always plug any open connections to prevent contamination.
Disconnect the clutch master cylinder supply line.
All vehicles
-
CAUTION: Always plug any open connections to prevent contamination.
Remove the brake fluid reservoir.
- Release the 2 clips.
- Remove and discard 2 brake fluid reservoir seals.