LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2015 >> LR4 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster -- LR4/L319 >> Instrument Cluster >> Instrument Cluster Lens >> Removal And Installation >> Removal

Removal And Installation: Removal

CAUTION: Make sure that the dial indicators are not moved during the removal and installation of the lens. If this occurs, you must not attempt to reset them using your hands as this will affect the calibration of the instrument cluster and will require a full instrument cluster calibration to be carried out.
NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
  1. Refer to: Instrument Cluster .
  2. CAUTION: To prevent static damage to the circuits, place the instrument cluster inside the electro static discharge bag and use the gloves provided during this procedure.
    G11600887
  3. NOTE: Gently release by pressing down on the white part of the clips.
    G11600888
  4. CAUTION: Take care not to damage the circuit board.
    NOTE: Gently release by pressing down on the black part of the clips.
    G11600889
  5. G11600890

    Remove the instrument cluster lens from the electro discharge bag and discard.

scientia non olet · About LEMON Manuals