General Procedures: Adjustment
WARNING: This page is about a different car, the 2018 Jaguar XF and 2017 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
- Top-up the transfer case with recommended fluid, until the fluid is level with the bottom of each of the filler/level plug holes.
-
CAUTION: Make sure that a new sealing washer is installed.NOTE: Make sure that all the component mating faces are clean.
Torque Specification: : 8 Nm
-
NOTE: Make sure that all the component mating faces are clean.
Torque Specification: : 25 Nm
- Refer to: Air Deflector