Rear Section - 4.2L Naturally Aspirated (NAS Only) - From 2010MY

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2015 Jaguar XFR-S, 2015 Jaguar XFR, 2015 Jaguar XF, 2014 Jaguar XFR-S, and 2014 Jaguar XFR. However, it is still accessible from the selected car via links, so may be relevant.

The 2 inlet pipes each connect into a separate resonator silencer. Each resonator silencer is cylindrical in shape and houses 2 perforated tubes separated by 2 baffle plates. Exhaust gasses exit each resonator silencer via an outlet pipe. The 2 outlet pipes are joined together behind the resonators with a cross over pipe. Each pipe also has a welded hanger bracket which allow the rear section to be supported on mounting rubbers. A further bracket is welded to each pipe which braces the 2 pipes together.

The 2 rear silencers each have a welded inlet pipe which mate with the outlet pipes from the resonator silencers and are each secured with a clamp. The inlet pipes each have a welded hanger bracket which support each rear silencer at the rear of the vehicle on mounting rubbers. The fabricated rear silencers have 2 perforated tubes which are supported on 2 perforated baffle plates. The exhaust gasses are expelled from the rear silencer via a single outlet pipe. The outlet pipe from each silencer has a welded hanger bar which support the rear silencer on mounting rubbers. The outlet pipe is fitted with a welded outlet which is covered with a polished stainless steel finisher which is part welded to the silencer.