LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2014 >> Range Rover Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel & Console - Standard Wheel Base -- Range Rover/L405 >> Instrument Panel And Console - Standard Wheel Base >> In-Vehicle Crossbeam >> Removal And Installation >> Removal

Removal And Installation: Removal

NOTE: Removal steps in this procedure may contain installation details.

All vehicles 

  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Make the SRS system safe.

    Refer to: STANDARD WORKSHOP PRACTICES .

  3. Refer to: HEATER CORE AND EVAPORATOR HOUSING .
  4. G11704274

    Torque Specification: 2.2 Nm 

  5. G11753935
  6. G11753936
  7. G11753937
  8. G11753938
  9. G11701303
  10. G11704276
  11. G11701301
  12. G11694088
  13. G11753943
  14. G11701778
  15. G11704281
  16. G11704282

    Torque Specification: 25 Nm 

  17. CAUTION: Install all the bolts finger tight before final tightening.
    G11704283

    Torque Specification: 9 Nm 

  18. NOTE: Install the bolt finger tight before final tightening.
    G11704284

    Torque Specification: 12 Nm 

  19. CAUTION: Install all the bolts finger tight before final tightening.
    G11704285

    Torque Specification: 9 Nm 

  20. G11702651
  21. CAUTION: Install all the bolts finger tight before final tightening.
    G11702652

    Torque Specification: 9 Nm 

  22. G11753952
  23. CAUTION: Install all the bolts finger tight before final tightening.
    G11704289

    Torque Specification: 9 Nm 

    NAS vehicles 

  24. G11704290

    Torque Specification: 9 Nm 

    All vehicles 

  25. CAUTION: Install all the bolts finger tight before final tightening.
    G11704291

    Torque Specification: 12 Nm 

  26. G11704292
  27. G11704293
scientia non olet · About LEMON Manuals