Head Up Display

The Head Up Display (HUD) is controlled from the Instrument Cluster (IC) message center menu.

When selected, the menu offers the following options:

• Selecting the position of the display on the windscreen.
• Display brightness.
• Selecting which information is displayed on the HUD.

Control of the display brightness can be adjusted in three different ways:

• As listed above, manually, from within the IC HUD control message center menu.
• If the vehicle lighting is switched on, the HUD display will adjust simultaneously with the manual adjustment of the IC panel light dimmer switch.
• Automatic brightness, controlled using data from the ambient light sensor, housed in the rain sensor.

Prior to selecting the HUD windscreen position the user should select their desired seating position. The steering wheel controls are used to set the horizontal position of the windscreen display. Once set, the information can be saved in the seat memory control system, storing the selected preferences.

For additional information, refer to: SEATS - DESCRIPTION AND OPERATION , EXTERIOR LIGHTING - DESCRIPTION AND OPERATION .