LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2014 >> Range Rover Autobiography >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Electronic Engine Controls - TDV6 3.0L Diesel -- Range Rover/L405) >> Electronic Engine Controls - TDV6 3.0L Diesel >> Electronic Engine Controls (Diagnosis And Testing) >> Diagnosis And Testing >> Drive Cycle: Generic >> Interpretation Of Results

Interpretation Of Results

WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.

If the readiness status of any group of monitors (excluding the particulate matter sensor monitors and the non-methane hydrocarbons monitors) is displayed as 'Incomplete', perform the generic drive cycle again after ensuring that the entry conditions are satisfied.

If the readiness status of the particulate matter sensor monitors is displayed as 'Incomplete', it is recommended that these monitors are allowed to achieve readiness automatically during normal driving by the customer.

If the readiness status of the non-methane hydrocarbons monitors is displayed as 'Incomplete', it is recommended that these monitors are allowed to achieve readiness automatically during normal driving by the customer.

If the readiness status of every group of monitors is displayed as 'Complete', no further action is necessary.

scientia non olet · About LEMON Manuals