LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2014 >> Range Rover Autobiography >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Auxiliary Climate Control - TDV6 3.0L Diesel/TDV8 4.4L Diesel/V6 S/C 3.0L Petrol/V8 N/A 5.0L Petrol/V8 S/C 5.0L Petrol -- Range Rover/L405) >> Auxiliary Climate Control - TDV6 3.0L Diesel / V6 S/C 3.0L Petrol / V8 N/A 5.0L Petrol / V8 S/C 5.0L Petrol >> Fuel Fired Booster Heater Coolant Changeover Valve >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Land Rover Range Rover and 2017 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the Fuel Fired Booster Heater (FFBH) coolant changeover valve.
    • Connect the FFBH coolant changeover valve electrical connector.
    • Install the coolant hose.
  3. Install the FFBH.

    Refer to: FUEL FIRED BOOSTER HEATER .

  4. Connect the startup battery ground cable.

    Refer to: SPECIFICATIONS .

scientia non olet · About LEMON Manuals