Possible Causes
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
To monitor glow plug and glow plug wiring harness. Glow plug control module output terminal is open circuit or short circuit to power
- Electrical Cause
- Yes
- Mechanical Cause
- Yes
- Control module cavity
- TDV8 Circuit reference I_T_GLW2
- Circuit reference O_T_GLW
- Circuit reference I_T_GLW1
- The powertrain control module has received an indication about the component that indicates a failure e.g. an intelligent actuator or sensor is indicating an internal fault
- Glow plug circuit open circuit, high resistance
- Glow plug control module connector is disconnected, connector pin is backed out, connector pin corrosion
- Glow plug failure