Possible Causes
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Purpose of the DTC
- Report reception of invalid vehicle speed data
- Electrical Cause
- Yes
- Mechanical Cause
- No
- Control module cavity
- Circuit reference B_D_FR_BP
- Circuit reference B_D_FR_BM
- Monitor Description
- Vehicle speed signal quality below threshold
- Prioritised List of Possible Causes
- The value of the signal measured by the powertrain control module is not plausible given the operating conditions
- Other vehicle speed related DTCs
- Brake pedal switch adjustment
- Brake pedal switch circuit short circuit to ground, short circuit to power, open circuit, high resistance
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Brake pedal switch failure