DTC P0501-29: Vehicle Speed Sensor "A" Circuit Range/Performance - Signal invalid: Action
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Vehicle Conditions to enable DTC Logging strategy
- Ignition on
- Prioritised Checks to Perform
- Check anti-lock brake system control module for vehicle speed related DTCs and refer to relevant DTC index
- Check brake pedal switch for correct adjustment
- Refer to the appropriate system wiring diagram and check the brake pedal switch circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Inspect connectors for signs of water ingress, and pins for damage and/or corrosion
- Check and install a new brake pedal switch as required
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest