DTC P0384-12: Glow Plug Control Module 1 Control Circuit High - Circuit short to battery: Action
WARNING: This page is about a different car, the 2018 Land Rover Range Rover, 2017 Land Rover Range Rover, and 2016 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
- Vehicle Conditions to enable DTC Logging strategy
- Using the Jaguar Land Rover approved diagnostic equipment, activate glow control module
- Prioritised Checks to Perform
- Refer to the appropriate system wiring diagram and check the glow plug control module circuit for short circuit to power
- Inspect connectors for signs of water ingress, and pins for damage and/or corrosion
- Check and install a new glow plug control module as required
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest